Building Regulations Overseen by Consulting Engineers During Construction
Today's construction industry has seen many changes. Builders and engineers work hard to deliver structural designs with great aesthetic appeal and lifetime reliability. Regulators have also stepped up to implement policies and checks that guide the work done by both engineers and builders. Specifically, engineers come in handy when you need to comply with building regulations and get the approvals you need for construction and occupancy. You might not know anything about such regulation unless you dig deep into the world of construction and contractors. Here is a piece with a detailed discussion of the building regulations overseen by engineers today:
Building Structure
Engineers are instrumental for ensuring that your building structure is compliant with the existing regulations. Usually, the general requirement is that all new structures should be robust and safe. They should also be made in a way that does not impair the structural wellbeing of the buildings nearby.
Safety and robustness can sound vague for those who do not understand the nitty-gritty. Engineers must work with builders to ensure that they mix and lay material according to design standards. They also lay down the rules for masonry and timber elements that will accessorise different sections of the building.
Site Preparation and Resistance
Lots of work goes into preparing the site before construction begins. Some of this work aims at making the site conducive for the work while some of them are done for the building's long-term good. During this stage, engineers will recommend and oversee activities like making the site weather-tight and water-tight. They also draw the framework for dealing with subsoil drainage and accessories required to combat land contaminants and related hazards.
Passage of Sound
The passage of sound between buildings is an area of great concern. Therefore, building regulators take this seriously and set up measures to prevent noise pollution. Engineers incorporate the sound attenuation elements into the building's structural design before builders can start their work. The objective here is to make sure that these attenuation panels sit correctly without interfering with the tensile strength of the concrete, steel rebar and other materials. Secondly, the engineers also ensure that the attenuation methods achieve the purpose of the installation. Panels installed to attenuate sound between two rooms may differ from those designated to prevent the movement of sound from one building to the other.
Consulting engineers have a range of skills that will meet your specific project. You will get everyone you need from acoustic engineers handling sound matters to geotechnical engineers specialising in soil matters on the site. Contact a consulting engineer to learn more.
Share
